A bollard is a short vertical post. Originally it meant a post used on a ship or a quay, principally for mooring. The word now also describes a variety of structures to control or direct road traffic, such as posts arranged in a line to obstruct the passage of motor vehicles.[1] In addition, bollards are used in the lighting industry to describe short, post-like light fixtures.

Guide Posts and Signs come in a variety of colors and styles for every directional need. Traditional Guide Posts and Signs, Delineators and Delineator Spot Reflectors provide barriers for traffic flow and guide vehicles through hazardous areas. Flexible Guide Posts and Flexible Glo Posts bounce back after impact and reduce

Spring Posts comes in 80 x 300mm, 600mm, 750mm Heights. ROAD BARRIERS.Spring Post Model No. TSP01 Spring Post Using EVA material, with the character of high pressure-resistance, bending-resistance, torsion-resistance. Good sun resistance and not fade

Reflective Road SafetyJackets are fabricated using advanced scientific and technical fabric andfilm tapes which enhance person's visibility from maximum and longestdistances. They are fluorescent in color and are UV stabilized.

Reflective Road Safety Jackets are fabricated using advanced scientific and technical fabric and film tapes which enhance person's visibility from maximum and longest distances.

Light Weighted without Rubber Base, can be used with other accessories Like Light Bar, Reflector, Message Plate.

• Solar Panel: 3.5V/78mA,high efficient monocrystalline silicon solar panel.
• Battery: Ni-MH,2.4V/600mAH,temperature-resistant.
• Light Source: using 4LED/2LED of 9200mcd, 5 white or yellow LED mixture with reflector in the middle.
• Light Mode: Flash: the signal or double side with 180times/Min.
• Runtime: Sustained highlighted lighting over 200 hours.
• Light Control: Auto-light control (300-700lux start-up control led) (Based on demand for single-sided and double-sided distinction. LED is red, yellow, white, blue or green).
• Material: Housing is Transparent PC.
• Using Temperature Range (Degrees):-20≥~+80≥.
• Storage Temperature Range (Degrees):-20≥~+40≥.
• Waterproof: Waterproof when being soaked.
• Dimension: Length:100mm , Width:83mm,Thickness:20mm.
• Weight:about 155g.
• Compressive Strength: over 30 tons.
• Visible Distance: More than 500 meters.

• Solar cell: Poly-crystalline silicon/single-crystalline silicon(3V, 75mA)
• Storage battery: Ni-MH(1200mAH)/super capacitor(50F)
• Light source: Super luminosity LED
• Luminous mode: Varyingtype/constant type
• Work time: More than 120 hrs forvarying type, and above 48 hrs for constant type(standard luminosity intensity)
• Work Circumstance: -25 to +75degree.
• Material: Aluminum alloy and polycarbonate
• IP rating: IP68 Resist compression:30tons
• Service life: 2 years(Ni-MH )or 5years(super capacitor)
• View distance: Over 800m

• Solar Road Stud without Shank
• Material: Toughened Aluminium alloy & Polycarbonate
• Weight: 310±15 gms.
• Solar Panel: 2.5 V, 0.15 - 0.3W
• Battery: 1.2V Re-chargeable battery (1.no.)
• LEDs: 3x2 Super Bright LEDs
• Frequency: 1.75-2.5 Hz (100-150 times perminute)
• Visibility: Upto 800 meters
• Working Time: Up to 4 days after fullcharge, Up to 8 hours after 1 hour of charging
• Description: Solar Road Stud without Shank

Super bright LEDs, Auto ON-OFF Full charged powerto last 3 nights The warning distance is>500m Special design could preventtheft Flash Frequency : 74±5 times/min.

• Solar Panel: 2.0V/105MA,High Efficient Monocrystalline Silicon Solar panel.
• Battery: 1.2V/800mAH, HFR Ni-MH Battery.
• Light Source: Using 4 LED of 15000mcd,Red LED and using the Vacuum Aluminum Reflector.
• Light Mode: Flashes Single side 100 times per Min & Two sides 4LED lighting Alternately.
• Battery:- 1.2V Re-chargeable battery (1.no.)
• Runtime: Not a Illumination, Sustained highlighted lighting over 120 hours.
• Light Control: Auto-light control (300-700 lux start-up controlled).On-Off Operation of a Mandatory Power.
• Material: Anti-Aging and anti-water plastic (Ultrasonic Welding) .Housing Material is built in transparent Red PC and Handle is Dark PE
• Temperature Range (Degrees): -10~+60
• Dimension: Housing : Width : 80mm,Height : 70mm and Handle Base Diameter : 40mm X 70mm(H)
• Weight: About 130 gms
• Package: 50 pieces / Box

These high quality Solar Warning lights / Blinkers are made from very high quality raw material which ensures hassle free work performance at its user end. These Solar Blinkers are widely finds its applications in various Industrial Sectors.

These high quality Solar Blinkers are made from very high quality raw material which ensures hassle free work performance at its user end. These Solar Blinkers are widely finds its applications in various industrial sectors.

Solar Sunflower is a 12-hour operation solar based warning light to be installed at junctions,nosing and centre median for advance warning to the motorists. It is made of PP copy and PC reflector lens. The size of solar sunflower is 400mm circle comprises of 1no.

Rechargeable battery of 1.2V, 1.8 Ah and has a solar panel of 3.0V, 0.75W which charge the rechargeable battery during the day. The light comprises of 08 nos. super bright LEDs of 8000 mcd each which blink at 1 Hz frequency and give advance warning to the drivers from up to 1 km. Solar sunflower is installed at places where accidents potentially occur often, like attunnels' entrances, bridges and under passes, 3-way junction separators, infront of piers, median strips, etc. It helps preventing serious trafficaccidents by cautioning in advance as it's visible from about 1 KM of distance.

A Traffic Warning Sign is a type of Traffic Sign that indicates a hazard ahead on the road that may not be readily apparent to a driver.In most countries, they usually take the shape of an equilateral triangle with a white background and a thick red border. However, both the color of the background and the color and thickness of the border varies from country to country.

Our range of Traffic Safety Signs also comprise of Traffic Warning Signs which are available in different dimension and are even custom-made as per Client's needs. These Traffic Warning Signs are manufactured using High grade material and precision made for perfect finish.

A Directional Sign, more fully defined as a Direction, Position, or Indication Sign on Road Signs and Signals, is any road sign used primarily to give information about the location of either the driver or possible destinations, and are considered a subset of the informative sign group.

We produce excellent quality Advance Direction Signboards for clients at effective rates. Available in different dimensionsand forms, these direction signs boards are made using goodquality material for imparting durability and finest quality.

Mandatory signs are road signs which are used to set the obligations of all traffic which use a specific area of road. Unlike prohibotory or restructive signs, mandatory signs tell traffic what it must do, rather than must not do. Most mandatory road signs are circular, may use white symbols on a blue background with white border or black symbols on a white blackground with a red border, although the latter is also associated with prohibitory signs

We create mandatory signs as per customer requirement in different sizes and dimens.These traffic safety mandatory signs are used at different places for displaying varied info/rules or traffic

These Chevron Signs are fabricated under the vigilance of the experts to ensure they are in compliance with the industry standards. Our dimensionally accurate Chevron Signs are extensively used on roads and other areas to show directions to the drivers. These durable Chevron Signs can be availed by the clients at market leading prices.

Delineator locates on the edge of the road side and indicates the directions on the road. Delineator has the feature of retro reflection . It is widely used on the road and largely reduces traffic accidents.

Thermoplastic Road Marking had been recognized as the single most important contribution to road safety. Not only does it provide night visibility, it alaso enforces traffic discipline and provides necessary information to road users. For these reasons Thermoplastic Road marking is used on all roads across the world. Road Markings that focus on safety and visibility

The material typically is utilized for short time Advertisement / signs,stickers, no. plates within areas having low volume, little competing surroundinglight and lower speed traffic.A Medium-Intensity Retroreflective sheeting referred to as 'Commercial Grade" and typically enclosed lens glass-bead sheeting. Typical applications for this material are permanent highway signing, construction zone devices, and delineators.

Type I, also known as Engineer Grade: Basic reflective sheeting, made up of very small glass beads enclosed in a translucent pigmented substrate. Has no distinctive identifying pattern, other than, of course, it reflects. This material is one of the most durable (in its ability to withstand rough handling) of all the sign sheeting products. Generally regarded to have a seven year service life Best for:This sheeting is generally utilized for signs within areas having lower speed traffic,low volume, and little surrounding light. Medium-Intensity Retroreflective Sheeting referred to as "Engineering Grade" and typically enclosed lens glass-bead sheeting. Typical applications for this material are permanent Highway Signing, Construction Zone Devices, and Delineators.

This is also a multi-layer sheeting, except that the reflective layer is made of microscopic cube-corner reflectors instead of glass beads - known as a "microprismatic" layer. This sheeting can be distinguished by the pattern of small "squares" superimposed upon a hexagonal lattice grid. This sheeting is about seven times as bright as Type I. Cost is comparable to type III. Generally regarded to have a ten year service life. Best for : This type of sheeting is used for all traffic situations. High Intensity Prismatic is extremely reflective at large angles for the approaching traffic.A High-Intensity Retroreflective sheeting. This sheeting is typically an unmetallized microprismatic retroreflective element material. Typical applications for this material are permanent highway signing, construction zone devices, and delineators.

Best for: This reflective sheeting is used in all road safety application and imparts excellentperformance at all sight distances, and light and weather conditions.A very-High-intensity Retroreflective sheeting having highest Retroreflectivity characteristics at short road distances. This sheeting is typically an unmetallized microprismatic retroreflective element material. Typical applications for this material are permanent highway signing, construction zone devices, and delineators.

Colored Overlay Retro-Reflective films are an acrylic film specifically designed for use with electronic plotters. Colored Overlay Retro-Reflective films is a durable, dimensionally stable, transparent, colored film with a highly transparent, pressure sensitive adhesive protected with a removable liner. These films offers optimal cutting, weeding, lifting, application, and adhesion to all Retro-Reflective sheeting.

Colored Overlay Retro-Reflective films may be applied on White Retro-Reflective sheeting to produce high quality street name, guide, and other traffic control signs. These films is especially effective where a small quality signs is required or in those geographical regions where air quality regulations prohibit the use of solvent based screening inks.

Vehicle Conspicuity Tape is the original version of conspicuity used in the United States, Brazil and other countries for truck conspicuity. It is a metallized microprismatic tape offering easy application with its single-ply construction. V-5720 is a highly durable tape available in various striping configurations. All V-5720 is available with logo configuration.

Avery Dennison V-6700B Series Conspicuity Tapes are approved for ECE-48 & ECE-104 regulations:

• Prismatic lens technology meets high visibility requirments and increases visibility of marked vehicles
• Repositional adhesive allows for faster, easier installation
• Omni-directional technology allows installers to install in any orientation and maintain maximum reflectivity
• Single layer construction eliminates dirt and water penetration on edges and protects against impact and pressure washing

Reflective on both side using 100mm Dia Circle made of fluorescent yellow micro prismatic sheeting confirming to type IX as per ASTM D4956 Standards.

Excellent Visibility during dawn, dusk and all time during day & Night. Excellent long distance visibility for extended distances, enhancing safety standards on roads. Excellent angularity offering highest visibility. Offer excellent luminance, throughout the approach regardless of the marker or vehicle placement.

Our stainless steel mirrors are ideal for all indoor / outdoor applications and are engineered to withstand extreme conditions without compromising on the reflective properties. Available in 4 sizes, both come complete with wall and pole brackets. They require no maintenance other than an occasional wipe with a clean wet sponge. These mirrors are extremely weather resistant.

Plastic speed breakers are extremely resistant to harsh weather conditions and severe impacts. The dovetail interlocking subunitsmake it bind completely into one firm bump. The pre-colored material(Black/Yellow) and UV stabilizers keep these perpetually colorful. Studded with Reflectors on either side , these are clearly visible for motorists in night hours. Uses: - These Speed Breakers are excellent for Private Colonies, Schools , Hospitals, Colleges, Security Check Posts, Universities, Loading sites, Parking Areas etc. in Cities. Easily removable, these breaker can easily be relocated as desired . The question of adding speed humps or any other residential traffic control device usually results from residents who are concerned about traffic safety in their neighborhoods. Because of general increased traffic flow, more traffic naturally moves through residential neighborhoods. Due to poorly designed roadways, it is easy for cars to use local streets as shortcuts between collectors and arterials. In addition, drivers often do not obey the residential speed laws, which are generally lower than on collectors and arterials

Plastic Rumbler Size: 275X150X30mm Two Way Reflective Eye Bolls (Led). Plastic Body with 6 Nos. Eye Bolls Each Side.

Reflective pavement marker raised reflective pavement markers (RPM's) are highly durable devices which provide day and night visibility under adverse weather conditions. They are reflectorized, that is, they reflect the light from a vehicle's headlights back towards the driver's eyes ans appear as a bright-coloured dot of light. RPM's provide a clear, definitive outline of the pavement markings even during poor visibility conditions such as rain, fog and darkness. RPM's products through the films of the water on the pavement and brake the mirror- like surface of the wet pavement.

Sintax road barrier dividing road